You may want to mount to the peak of the roof making the tripod mount the correct choice. On the slope of your roof then choose a sloped roof mount. To the eave fascia choose the eave mount. You may decide a chimney mount is best. Whatever you decide rest assure our antenna mounts are built strong and made in the USA >.
The above 3 foot tripod is a very sturdy antenna mount. Designed to straddle the roof peak. You won't be disappointed. This item is professional grade from top to bottom.
Lag screws and roof sealing pads included.
Install the antenna tripod >
More Details >
In Stock
Made in the USA
The 5 foot antenna tripod mount is the ultimate in stability. The best choice for mounting larger antennas in windy areas. The wider stance of the 5 foot tripod increases the stability when compared to the 3 foot tripod.
Lag screws and roof sealing pads included.
Install the Antenna Tripod >
More Details >
In Stock
Made in the USA
The eave mount is a customer favorite. Built sturdy to securely mount small or large antennas. The lower bracket adjusts to accommodate any angle roof. We chose this eave mount as the best eave mount because of strength and weather resistance.
Lag screws included. - Pipe shown not included
Install an Eave Mount
More Details >
In Stock
Made in the USA
The chimney antenna mount comes with two sturdy brackets and two 18' long stainless steel straps. We recommend at least 1 foot of separation between bracketsfor smaller antennas and 2 feet of separation for larger antennas.
>
>
In Stock
>
Made in the USA
1.25" X 5' galvanized antenna mast pipe. Tapered end allows the joining of additional pipes to make a single longer section of pipe.
More Details >
In Stock
Made in the USA
The sloped roof antenna mount is handy when the best place to mount the antenna is on the slope of a peaked roof. Built from sturdy galvanized steel.
(Lag screws and roof sealing pads included.)
More Details >
In Stock
Made in the USA
The 18" J pole is designed to accommodate smaller antennas such as the EZ HD or omnidirectional antennas. Powder coated for superior protection against the elements. Base plate is fully adjustable to any angle.
(Lag screws and roof sealing pads included)
More Details >
In Stock
Made in the USA
The 36" J Pole accommodates larger antennas and provides more vertical space to mount the antenna
when compared to the 18" J Pole mount. Powder coated for superior protection against the elements.
Swivel base adjusts to any angle.
(Lag screws and roof sealing pads included)
More Details >
In Stock
Made in the USA
Slips snugly into standard J pole. Fits either our 18" J Pole or 36" J pole mount. Galvanized steel 4 feet in length.
More Details >
In Stock
Made in the USA
![]( "4")
One pair 4" wall mounting brackets.Very sturdy zinc plated steel.
Nuts, bolts and lag screws included
More Details >
In Stock
Made in the USA
![]( "6")
One pair of 6" wall mounting brackets.Very sturdy zinc plated steel.
Complete with nuts, bolts and lag screws.
More Details >
In Stock
Made in the USA
![]( "8")
One pair of 8" wall mounting brackets.Very sturdy zinc plated steel.
Complete with nuts, bolts and lag screws.
More Details >
In Stock
Made in the USA
0ne pair of 12" wall mounting brackets. Very sturdy zinc plated steel.
Complete with nuts, bolts and lag screws.
More Details >
In Stock
Made in the USA
0ne pair of 18" wall mounting brackets. Very sturdy zinc plated steel.
Complete with nuts, bolts and lag screws.
More Details >
In Stock
Made in the USA
24" Wall Bracket Antenna Mast Mount
$38.00
0ne pair of 24" wall mounting brackets.Very sturdy zinc plated steel.
Complete with nuts, bolts and lag screws.>
>
>
In Stock
Made in the USA
